Top-Tier Plumbing Stock
Factory Direct Grid Strainers & Components
Explore our catalog of certified kitchen sink grid strainers, heavy-duty bottom racks, and specialty architectural plumbing hardware engineered in ISO 9001:2015 accredited facilities.
Procurement Intelligence
Global Enterprise Sourcing Demands for Grid Strainers
Commercial construction projects, healthcare sanitary systems, and retail brand distributors face severe challenges regarding drain integrity, microbial retention, and code liability.
Tamper-Proof Anti-Vandalism Architecture
Unlike standard domestic pop-up stoppers or removable lift-and-turn plugs, modern public washrooms, airport terminals, educational institutions, and hospitality infrastructures require fixed commercial grid strainers. The permanent grate array blocks intentional foreign object introduction, mitigating hazardous sewage pipeline backups and preventing hardware theft.
Severe Corrosion Resistance & CW617N Solid Brass
Procurement teams demand robust metallurgical composition. While low-cost zinc alloys degrade rapidly when subjected to chlorinated sanitizers and acidic gray water, JANA leverages forged solid brass and AISI 304/316 stainless steel. This prevents dezincification and stress-corrosion cracking, dramatically extending commercial facility lifespans.
Hydrodynamic Efficiency & Overflow Elimination
A frequent pain point in high-throughput industrial and medical wash basins is restricted flow rate causing premature overflowing. Modern engineered grid patterns balance physical sediment exclusion (hair, textile fibers, dense solids) with maximum volumetric discharge, adhering strictly to ASME A112.18.2 / CSA B125.2 hydraulic benchmarks.
Global Supply Security
Dual-Origin Manufacturing Infrastructure: China & Thailand
In an increasingly volatile geopolitical climate marked by tariff shifts and logistical bottlenecks, enterprise OEMs require resilient supply-chain redundancy without compromising dimensional quality.
China Production Hub (Yuhuan, Zhejiang)
Established in early 1998, our primary engineering facility acts as the core center for technical research, complex mold casting, and ultra-high-volume component production. Equipped with multi-station progressive stamping dies and heavy-tonnage hydraulic presses, this plant delivers end-to-end processing from raw brass bar melting to decorative physical vapor deposition (PVD) finishes.
Deep Tooling Development
Precision Stamping Dies
High-Volume Scale
28,000+ m² Integrated Space
Thailand Automated Factory (Kabinburi Industrial Zone)
Commissioned in December 2023, Gateway Enterprise Corporation (Thailand) Co., Ltd. spans 14,400 square meters of specialized manufacturing real estate in Prachinburi Province. Built around robotic manipulators and high-efficiency automated machining cells, the facility operates to mitigate Section 301 tariffs while guaranteeing pure Origin of Country (COO) compliance for North American accounts.
Zero Tariff Risk
Automated Machining Cells
Robotic Polishing Lines
Seamless Transfer Tooling
Next-Gen Road Map
Engineering Roadmap & Technological Frontiers
How our engineering divisions are reinventing sanitary drainage systems through materials science, AI quality control, and micro-precision surface finishing.
Phase 1: Materials
Lead-Free Eco-Alloys
Refining silicon-brass and bismuth-copper alloys to surpass California AB1953, NSF/ANSI/CAN 61, and Annex G requirements while optimizing metal ductility and thread shearing thresholds.
Phase 2: Vision QA
AI Optical Profilometry
Deploying automated in-line computer vision to inspect every 19-hole and radial grid pattern, measuring chamfer consistency and burr-free aperture clearances with 0.02mm micro-tolerances.
Phase 3: Coatings
Nanotech PVD Finishes
Formulating diamond-like carbon (DLC) and cathodic arc physical vapor deposition coatings for architectural finishes—including Matte Black, Brushed Bronze, and Antique Copper—rated for 240hr CASS salt spray.
Phase 4: Tooling
Cold Flow Hydroforming
Transitioning from multi-piece seam welding to monolithic deep-draw cold hydroforming for sink strainer baskets and overflow channels, eliminating microscopic seam weak points entirely.
Audited Compliance
International Regulatory Compliance & Verification
Engineered to satisfy the world's most rigorous plumbing codes, supported by verifiable independent testing laboratory certifications for wholesale channels.
cUPC & UPC Certification
Certified under IAPMO R&T listing standards (Cert Nos. 6229, 8175, 12307) adhering to uniform plumbing codes across all US states and Canadian territorial jurisdictions.
AB1953 & NSF/ANSI 372
Strictly compliant with California health standards for lead-free wetted surface components, providing laboratory trace element spectroscopy analysis for all brass casts.
ISO 9001:2015 Management
Institutional quality system auditing throughout receiving raw brass ingots, metallurgical furnace testing, precision stamping, robotic polishing, and final packaging.
ASME A112.18.2 / CSA B125.2
Full mechanical qualification for thread pull strength, torque testing of locknuts, tailpiece wall thickness tolerances (17 vs. 20 Gauge), and continuous pressure seals.
Procurement Inquiries
Frequently Asked Questions: Wholesale & Manufacturing
Direct technical and commercial clarifications covering customized production, material choices, tool fabrication, and logistics routing.
What are the key technical differences between an open-grid strainer and a standard pop-up drain assembly?
An open-grid strainer features a fixed perforated metal grate plate without mechanical stoppage mechanisms (such as lift rods, push-buttons, or internal stoppers). Because water drains continuously and freely, it is strictly preferred by commercial, institutional, and high-foot-traffic facilities to eliminate accidental sink basin overflow risks, reduce maintenance points, and resist vandalism or component removal.
Can JANA produce customized grid patterns, hole diameters, and client-embossed logos?
Yes. With in-house progressive stamping die fabrication, precision hydraulic equipment, and fiber laser marking facilities, we can adjust hole perforation density (such as 19-hole arrays, radial slots, or bespoke architectural designs), change thread patterns (NPSM vs. UNEF), and engrave custom brand identities onto the flange surface.
How does the dual-origin manufacturing system between China and Thailand function for enterprise importers?
Both facilities utilize identical standard operating procedures (SOPs), tool alignments, and metallurgical validation equipment. Customers can place unified supply contracts and determine production routing based on trade requirements, import tariff quotas, or shipping line preferences, receiving authentic COO documentation alongside identical cUPC-certified component quality.
What brass material grades and wall thicknesses are standard for export shipments?
We manufacture drain bodies from solid forged CW617N, C37700, and eco-friendly lead-free copper-zinc compositions. Tailpieces are offered in heavy-duty 17 Gauge (approx. 1.15mm) for institutional specification or 20 Gauge (approx. 0.8mm) for competitive retail channels, finished with precision cut threads ensuring flawless mating with standard P-traps.
What surface finish treatments are available and what is their durability under abrasive cleaning conditions?
Our decorative coatings include electroplated Polished Chrome, Brushed Nickel, and ultra-durable Physical Vapor Deposition (PVD) finishes (Matte Black, Gunmetal, Brushed Brass, Antique Bronze). All finishes endure rigorous multi-hour acidic salt-fog evaluations (CASS) and cross-hatch adhesion testing to ensure they do not flake, peel, or tarnish under regular sanitizing protocols.
Complete Hardware Portfolio
Architectural Strainers, Replacement Baskets & Assemblies
Explore additional high-grade sink replacement inserts, disposal accessories, stainless assemblies, and precision overflow components built to heavy commercial standards.
