Direct OEM/ODM Foundry Supply • Spain & Southern Europe Compliance

Wholesale Bar Sink Strainer Supplier & Suppliers for the Spain Market

Engineered for Madrid & Barcelona HORECA contractors, sanitaryware wholesalers, and architectural hardware distributors. Precision brass & AISI 304 stainless steel junior duo strainer solutions.

Send Inquiry Now → Explore Spain Market Whitepaper
Executive Industry Analysis

Commercial & Industrial Sink Strainer Dynamics in Spain

A rigorous examination of Spain's hospitality sector, CTE (Código Técnico de la Edificación) building regulations, and evolving drainage demands.

Spain HORECA Boom

With over 300,000 bars, tapas taverns, and restaurants across Andalusia, Catalonia, and Madrid, the demand for compact 2-inch to 2-1/2-inch auxiliary bar sinks has surged by 14.8% post-pandemic. High turnover requires continuous pulp and seed capture to prevent catastrophic grease-trap blocks.

UNE-EN 274 Compliance

Spanish sanitaryware specifiers mandate strict adherence to UNE-EN 274 standards for waste fittings. Products must resist high-temperature rinse cycles (up to 95°C) and aggressive citric acids from Spanish cocktail and beverage preparation without pit corrosion or thread failure.

Modular Wet-Bar Trend

Modern luxury residential developments in Costa del Sol, Ibiza, and Barcelona prioritize outdoor summer kitchens and secondary kitchen islands. These installations dictate designer-grade PVD finishes (Matt Black, Brushed Gold, Gunmetal) applied directly on solid CW617N brass substrates.

Comparative Specification Matrix: Standard vs. JANA Engineered Bar Strainers

Engineering Dimension Standard Commercial Strainers JANA Heavy-Duty JN-Series (Spain Spec) Operational Benefit for Spanish Importers
Substrate Material Recycled die-cast zinc / thin-wall SS 201 Heavy Forged CW617N Brass & AISI 304/316 Zero pinhole leaks; uncompromised acid resistance against citrus/wine
Sealing Architecture Single standard Buna-N rubber flat washer Dual Santoprene™ / EPDM Molded Beveled Ring Guaranteed hydrostatic seal under European CTE water hammer tolerances
Thread Precision Loose rolled threads (risk of cross-threading) CNC-Lathe Machined 1-1/2" BSP / NPSM Flange Rapid 4-minute contractor seating without PTFE paste leakage
Basket Mechanism Thin ball-bearing pop-down (stuck by debris) Solid brass post with neoprene positive-lock seal Withstands 200,000+ commercial bar duty cycles without wobble
28+
Years Engineering (Est. 1998)
28,400m²
Dual-Plant Production Hub
<0.03%
Defect Rate in Bulk OEM Batches
100%
Compliance Ready for UNE-EN & cUPC
Strategic Procurement Security

China & Thailand Dual-Origin Manufacturing Supremacy

Empowering European distributors with high-volume precision engineering, unshakeable tariff hedge, and end-to-end metallurgical quality control.

Dual-Foundry Supply Resilience

Headquartered in Yuhuan, Zhejiang since 1998, with our automated 14,400m² secondary facility in Kabinburi Industrial Zone (Thailand), JANA delivers geopolitical hedging, stable supply chains, and optimized EU customs clearing structures for Spanish volume buyers.

Robotic Automation & CNC Tolerances

Our hydraulic multi-stage drawing presses and robotic manipulator transfer lines eliminate manual stamping variances. Every bar sink strainer flange and locknut achieves micron-level concentricity, ensuring perfect alignment with standard Spanish 1-1/2” P-traps.

Custom OEM/ODM Branding & Packaging

We empower private-label brands across Valencia, Bilbao, and Seville with laser-etched distributor branding, eco-friendly multilingual master cartons (Spanish/English/French), barcode pre-labeling, and turnkey point-of-sale display cartons.

Upgrade Your Spanish Sanitary Catalog with Factory Direct Pricing

Inquire today to receive engineering CAD drawings, free master samples for UNE-EN compliance testing, and competitive tiered FCL/LCL quote schedules.

Send Inquiry Now →
Engineered for Demanding Environments

High-Performance Spain Sourcing & Project Applications

Where JANA heavy-duty bar sink strainers outperform standard domestic hardware.

High-Volume Craft Cocktail & Tapas Bars

Spanish bar backs process thousands of squeezed lemons, cocktail ice, and garnish residues nightly. Our deep junior duo baskets capture micro-particulates without clogging the main discharge pipe, cutting plumber emergency call-outs by 80%.

Luxury Residential & Urban Penthouse Islands

Contemporary renovations in Salamanca (Madrid) and Eixample (Barcelona) integrate auxiliary prep sinks within kitchen islands. JANA's PVD-coated stainless and solid brass strainers provide seamless flush architectural alignment with granite and Dekton countertops.

Boutique Hotel & Mediterranean Marine Fixtures

Coastal installations across the Balearic and Canary Islands suffer high humidity and saline water corrosion. JANA's solid CW617N brass and AISI 316 custom alloy options deliver unmatched corrosion resistance, making them ideal for marine galleys and luxury yachts.

Complete Catalog

Commercial Bar & Auxiliary Sink Drainage Solutions for Spain

Explore our precision-cast assemblies, extended tailpiece packages, and commercial overflow plates manufactured to European and international plumbing codes.

Procurement Intelligence

Frequently Asked Questions: Sourcing for Spain

Essential guidance covering Spanish plumbing sizing, customs logistics, MOQs, and OEM certifications.

What sink opening dimensions do JANA bar sink strainers fit for the Spanish market?
Our junior duo series (including JN-1201, JN-1202, and JN-1205) are engineered for standard 2-inch to 2-1/2-inch sink drain openings (50mm to 65mm drill holes), which represent the prevailing European standard for auxiliary, bar, and prep sinks. We also supply customized flange adapters and pre-connected 1-1/2" or 1-1/4" tailpieces that couple seamlessly with standard Spanish bottle traps (sifones de botella) and flexible waste extensions.
Can JANA supply products complying with Spain’s CTE and European UNE-EN standards?
Yes. JANA operates under an ISO 9001 certified quality management framework, and our sanitary drainage lines are tested to align with EN 274-1 and EN 274-2 standards for sanitary waste fittings. In addition, our foundries hold extensive North American UPC/cUPC and IAPMO listings, demonstrating our ability to satisfy rigorous hydrostatic, mechanical load, and chemical resistance thresholds.
How does the dual-production model (China & Thailand) benefit Spanish importers?
Our dual-foundry framework allows European buyers to mitigate single-region supply-chain risks. High-volume baseline stock can be shipped directly from our Ningbo-adjacent Zhejiang headquarters, or routed via our modern Kabinburi Industrial Zone facility in Thailand. This gives commercial importers purchasing flexibility, competitive logistics routing, and tariff resilience.
What are the minimum order quantities (MOQ) and production lead times for Spain?
For standard chrome and brushed stainless configurations, our MOQ starts at 500 units per SKU. For specialized PVD finishes (Matt Black, Brushed Brass, Gunmetal) or customized laser branding for Spanish wholesalers, MOQs are typically 1,000 units. Standard production lead times run between 25 to 35 calendar days from tooling approval and deposit confirmation.
Can JANA supply customized retail or blister packaging for Spanish hardware chains?
Absolutely. We regularly engineer custom retail packaging, including Spanish-language printed color boxes, double blister clamshell packs with hanging holes, and contractor multi-packs. Packaging features EAN-13 barcodes, Spanish technical instructions, and branded graphics tailored to your distribution channel.
Send Inquiry Now — Request Free Spain Catalog & Quote →